Did you know that lots of common mistakes are made while using a fridge? It’s true. Although it’s a kitchen appliance that your probably take for granted, as you’ve grown up using it, many people make common refridgerator mistakes that can result in pricey repairs.
We’ve put together some of the most common mistakes made by people that lead to fridge failure This information is based on the experience of professional specialists in the repair appliances service. So, if you want to ensure your fridge serves you well for many years to come, these are the mistakes to avoid!
Transportation
If you are transporting the refrigerator yourself from the store or during a move, you should remember one simple rule: you can only move the refrigerator in a vertical position. This rule is due to the need to maintain cleanliness in the lubrication supply system in the compressor. During horizontal transportation, this system can become clogged.
Place of installation
This is probably the most common mistake. After all, the majority of people do not know that it is impossible to install a fridge near the stove or heating elements. At least one metre is considered the optimal distance from the heat source. This information is written in the user manual, but, unfortunately, the majority of users do not read it. The same refers to warm floors.
Compressor overload
It is very easy to overload and break down the compressor. To do this, you only need to put a hot pan or another object with a high temperature in the refrigerator.
High-voltage
Electronics in refrigerators are very sensitive to voltage drops. Therefore, if you have an expensive new refrigerator, take care of it. Buy a voltage stabilizer, so you can be sure of saving your valuable equipment, even during voltage drops.
Temperature regime
By loading the upper shelves with large dishes, you interfere with the necessary air circulation to equalize the temperature regime. When this regime is violated, zones with different temperatures appear, which has bad consequences for both equipment and products.
Basic settings
Under the average load of the refrigerator, the settings should also change because the standard settings are calculated for the full load of the free space. Therefore, if your refrigerator stores a few products, you should edit the settings so that the compressor works correctly. Check out the manual for this information, or consult with the specialists from https://fixappliances.ca/refrigerator-repair/ to get a full list of recommendations.
Moisture
Excess moisture is the worst enemy of refrigerators. It appears as condensation when you open the refrigerator door or put warm objects inside. Cleaning with a damp cloth is also a common mistake.
Moisture is harmful to the refrigerator because it freezes on the wall of the refrigerator, which interferes with the normal operation of the ventilation system.
Freezers
The first mistake in using freezers is an overloaded freezer when you have a lot of products stored there for years. The second factor is the set temperature, especially in summer. If your freezer is maxed out in summer, the compressor is most likely maxed out as well. At this rate, the compressor wears out much faster. If you want to replace your freezer, you can browse new and refurbished home appliances Sydney and see what alternative options are available.
Radiator
A radiator or condenser is an essential part of every refrigerator. Playing the role of a heat sink, the radiator collects dirt and dust. We usually do not see it, because it is located on the back side, but it must be cleaned 2 times a year. For effective cleaning, use a vacuum cleaner and a stiff brush. Do not forget to turn off the refrigerator before cleaning.
Door seal
This rather simple and cheap structural element plays an essential role. After all, if the seal does not perform its functions, letting air into the middle of the appliance, the refrigerator will fail much sooner. It is much cheaper to change the seal than to repair the whole refrigerator.
For your seal to work properly for a long time, you need to take care of it. Sometimes it will be enough to wash it with soap and treat it with sealant or petroleum jelly. If you already see deformation and cracks, then it’s time to change this part.
Repair
Repairing a refrigerator on your own is far from the easiest task. Often, self-repair results in a larger amount of money than you could have spent on the work of a master. Only the timely help of an expert will help to save equipment and save money.
All in all, the acquisition of a costly piece of equipment does not mean you need to forget about it. Once installed, read a manual regularly and take the necessary maintenance steps to ensure that it will work for a long time with no faults and breakdowns. And if your fridge does eventually fail and you need a new one, check out our post on how to recycle your fridge.
0
Leave a Reply